cap≽ire

Appearance

Using PostgreSQL ​

This guide focuses on the new PostgreSQL Service provided through @cap-js/postgres, which is based on the same new database services architecture as the new SQLite Service. This architecture brings significantly enhanced feature sets and feature parity, as documented in the Features section of the SQLite guide.

Learn about migrating from the former cds-pg in the Migration chapter.

CAP Java 3 is tested on PostgreSQL 16 and most CAP features are supported on PostgreSQL.

Learn more about features and limitations of using CAP with PostgreSQL

This guide is available for Node.js and Java.

Use the toggle in the title bar or press v to switch.

Setup & Configuration ​

Run this to use PostgreSQL for production:

To run CAP Java on PostgreSQL, add a Maven dependency to the PostgreSQL feature in srv/pom.xml:

xml
<dependency>
    <groupId>com.sap.cds</groupId>
    <artifactId>cds-feature-postgresql</artifactId>
    <scope>runtime</scope>
</dependency>

In order to use the CDS tooling with PostgreSQL, you also need to install the module @cap-js/postgres:

sh
npm add @cap-js/postgres

After that, you can use the cds deploy command to deploy to a PostgreSQL database or to create a DDL script for PostgreSQL.

Auto-Wired Configuration ​

The @cap-js/postgres package uses cds-plugin technique to auto-configure your application and use a PostgreSQL database for production.

You can inspect the effective configuration using cds env:

sh
cds env requires.db --for production

Output:

js
{
  impl: '@cap-js/postgres',
  dialect: 'postgres',
  kind: 'postgres'
}

See also the general information on installing database packages

Provisioning a DB Instance ​

To connect to a PostgreSQL offering from the cloud provider in Production, leverage the PostgreSQL on SAP BTP, hyperscaler option. For local development and testing convenience, you can run PostgreSQL in a docker container.

To consume a PostgreSQL instance from a CAP Java application running on SAP BTP, consider the following:

  • Only the Java buildpack java_buildpack provided by the Cloud Foundry community allows to consume a PostgreSQL service from a CAP Java application.

  • By default, the java_buildpack initializes a PostgreSQL datasource with the Java CFEnv library. However, to work properly with CAP, the PostgreSQL datasource must be created by the CAP Java runtime and not by the buildpack. You need to disable the datasource initialization by the buildback using CFENV_SERVICE_<POSTGRESQL_SERVICE_NAME>_ENABLED: false at your CAP Java service module.

The following example shows these configuration settings applied to a CAP Java service:

yaml
modules:
  - name: bookshop-pg-srv
    type: java
    path: srv
    parameters:
      buildpack: java_buildpack
    properties:
        SPRING_PROFILES_ACTIVE: cloud
        JBP_CONFIG_COMPONENTS: '{jres: ["JavaBuildpack::Jre::SapMachineJRE"]}'
        JBP_CONFIG_SAP_MACHINE_JRE: '{ jre: { version: "17.+" } }'
        CFENV_SERVICE_BOOKSHOP-PG-DB_ENABLED: false

BOOKSHOP-PG-DB is the real PostgreSQL service instance name in this example.

Using Docker ​

You can use Docker to run a PostgreSQL database locally as follows:

  1. Install and run Docker Desktop

  2. Create the following file in your project root directory:

    yaml
    services:
  db:
    image: postgres:alpine
    environment: { POSTGRES_PASSWORD: postgres }
    ports: [ '5432:5432' ]
    restart: always

  3. Create and run the docker container:

    sh
    docker-compose -f pg.yml up -d

TIP

With the introduction of Testcontainers support in Spring Boot 3.1, you can create PostgreSQL containers on the fly for local development or testing purposes.

Service Bindings ​

You need a service binding to connect to the PostgreSQL database.

In the cloud, use given techniques to bind a cloud-based instance of PostgreSQL to your application.

For local development provide the credentials using a suitable cds env technique, like one of the following.

Configure Connection Data ​

If a PostgreSQL service binding exists, the corresponding DataSource is auto-configured.

You can also explicitly configure the connection data of your PostgreSQL database in the application.yaml file. If you run the PostgreSQL database in a docker container your connection data might look like this:

yaml
spring:
  config.activate.on-profile: postgres-docker
  datasource:
    url: jdbc:postgresql://localhost:5432/postgres
    username: postgres
    password: postgres
    driver-class-name: org.postgresql.Driver

To start the application with the new profile postgres-docker, the spring-boot-maven-plugin can be used: mvn spring-boot:run -Dspring-boot.run.profiles=postgres-docker. Learn more about the configuration of a PostgreSQL database

Service Bindings for CDS Tooling ​

Using Defaults with [pg] Profile ​

@cds-js/postgres comes with a set of default credentials under the profile [pg] that matches the defaults used in the docker setup. So, if you stick to these defaults you can skip to deploying your database with:

sh
cds deploy --profile pg

In Your Private .cdsrc-private.json ​

If you don't use the default credentials and want to use just cds deploy, you need to configure the service bindings (connection data) for the CDS tooling. Add the connection data to your private .cdsrc-private.json:

json
{
  "requires": {
    "db": {
      "kind": "postgres",
      "credentials": {
        "host": "localhost",
        "port": 5432,
        "user": "postgres",
        "password": "postgres",
        "database": "postgres"
      }
    }
  }
}

Configure Service Bindings ​

Using Defaults with [pg] Profile ​

The @cds-js/postgres comes with default credentials under profile [pg] that match the defaults used in the docker setup. So, in case you stick to these defaults you can skip the next sections and just go ahead, deploy your database:

sh
cds deploy --profile pg

Run your application:

sh
cds watch --profile pg

Learn more about that in the Deployment chapter below.

In Your private ~/.cdsrc.json ​

Add it to your private ~/.cdsrc.json if you want to use these credentials on your local machine only:

json
{
  "requires": {
    "db": {
      "[pg]": {
        "kind": "postgres",
        "credentials": {
          "host": "localhost", "port": 5432,
          "user": "postgres",
          "password": "postgres",
          "database": "postgres"
        }
      }
    }
  }
}

In Project .env Files ​

Alternatively, use a .env file in your project's root folder if you want to share the same credentials with your team:

properties
cds.requires.db.[pg].kind = postgres
cds.requires.db.[pg].credentials.host = localhost
cds.requires.db.[pg].credentials.port = 5432
cds.requires.db.[pg].credentials.user = postgres
cds.requires.db.[pg].credentials.password = postgres
cds.requires.db.[pg].credentials.database = postgres

Using Profiles

The previous configuration examples use the cds.env profile [pg] to allow selectively testing with PostgreSQL databases from the command line as follows:

sh
cds watch --profile pg

The profile name can be freely chosen, of course.

Deployment ​

Using cds deploy ​

Deploy your database as usual with that:

sh
cds deploy

Or with that if you used profile [pg] as introduced in the setup chapter above:

sh
cds deploy --profile pg

With a Deployer App ​

When deploying to Cloud Foundry, this can be accomplished by providing a simple deployer app. Similar to SAP HANA deployer apps, it is auto-generated for PostgreSQL-enabled projects by running

sh
cds build --production
What cds build does…
  1. Compiles the model into gen/pg/db/csn.json.
  2. Copies required .csv files into gen/pg/db/data.
  3. Adds a gen/pg/package.json with this content:
    json
    {
  "dependencies": {
    "@sap/cds": "^8",
    "@cap-js/postgres": "^1"
  },
  "scripts": {
    "start": "cds-deploy"
  }
}

Note the dash in cds-deploy, which is required as we don't use @cds-dk for deployment and runtime, so the cds CLI executable isn't available.

Add PostgreSQL Deployment Configuration ​

sh
cds add postgres
See what this does…
  1. Adds @cap-js/postgres dependency to your package.json dependencies.
  2. Sets up deployment descriptors such as mta.yaml to use a PostgreSQL instance deployer application.
  3. Wires up the PostgreSQL service to your deployer app and CAP backend.

Deploy ​

You can package and deploy that application, for example using MTA-based deployment.

Automatic Schema Evolution ​

When redeploying after you changed your CDS models, like adding fields, automatic schema evolution is applied. Whenever you run cds deploy (or cds-deploy) it executes these steps:

  1. Read a CSN of a former deployment from table cds_model.
  2. Calculate the delta to current model.
  3. Generate and run DDL statements with:
    • CREATE TABLE statements for new entities
    • CREATE VIEW statements for new views
    • ALTER TABLE statements for entities with new or changed elements
    • DROP & CREATE VIEW statements for views affected by changed entities
  4. Fill in initial data from provided .csv files using UPSERT commands.
  5. Store a CSN representation of the current model in cds_model.

You can disable automatic schema evolution, if necessary, by setting cds.requires.db.schema_evolution = false.

No manual altering

Manually altering the database will most likely break automatic schema evolution!

Limitations ​

Automatic schema evolution only allows changes without potential data loss.

Allowed ​

  • Adding entities and elements
  • Increasing the length of Strings
  • Increasing the size of Integers

Disallowed ​

  • Removing entities or elements
  • Changes to primary keys
  • All other type changes

For example the following type changes are allowed:

cds
entity Foo {
   anInteger : Int64;     // from former: Int32
   aString : String(22);  // from former: String(11)
}

TIP

If you need to apply such disallowed changes during development, just drop and re-create your database, for example by killing it in docker and re-create it using the docker-compose command, see Using Docker.

Dry-Run Offline ​

You can use cds deploy with option --dry to simulate and inspect how things work.

  1. Capture your current model in a CSN file:

    sh
    cds deploy --dry --model-only --out cds-model.csn

  2. Change your models, for example in cap/samples/bookshop/db/schema.cds:

    cds
    entity Books { ...
   title : localized String(222); //> increase length from 111 to 222
   foo : Association to Foo;      //> add a new relationship
   bar : String;                  //> add a new element
}
entity Foo { key ID: UUID }       //> add a new entity

  3. Generate delta DDL statements:

    sh
    cds deploy --dry --delta-from cds-model.csn --out delta.sql

  4. Inspect the generated SQL statements, which should look like this:

    sql
    -- Drop Affected Views
DROP VIEW localized_CatalogService_ListOfBooks;
DROP VIEW localized_CatalogService_Books;
DROP VIEW localized_AdminService_Books;
DROP VIEW CatalogService_ListOfBooks;
DROP VIEW localized_sap_capire_bookshop_Books;
DROP VIEW CatalogService_Books_texts;
DROP VIEW AdminService_Books_texts;
DROP VIEW CatalogService_Books;
DROP VIEW AdminService_Books;

-- Alter Tables for New or Altered Columns
ALTER TABLE sap_capire_bookshop_Books ALTER title TYPE VARCHAR(222);
ALTER TABLE sap_capire_bookshop_Books_texts ALTER title TYPE VARCHAR(222);
ALTER TABLE sap_capire_bookshop_Books ADD foo_ID VARCHAR(36);
ALTER TABLE sap_capire_bookshop_Books ADD bar VARCHAR(255);

-- Create New Tables
CREATE TABLE sap_capire_bookshop_Foo (
  ID VARCHAR(36) NOT NULL,
  PRIMARY KEY(ID)
);

-- Re-Create Affected Views
CREATE VIEW AdminService_Books AS SELECT ... FROM sap_capire_bookshop_Books AS Books_0;
CREATE VIEW CatalogService_Books AS SELECT ... FROM sap_capire_bookshop_Books AS Books_0 LEFT JOIN sap_capire_bookshop_Authors AS author_1 O ... ;
CREATE VIEW AdminService_Books_texts AS SELECT ... FROM sap_capire_bookshop_Books_texts AS texts_0;
CREATE VIEW CatalogService_Books_texts AS SELECT ... FROM sap_capire_bookshop_Books_texts AS texts_0;
CREATE VIEW localized_sap_capire_bookshop_Books AS SELECT ... FROM sap_capire_bookshop_Books AS L_0 LEFT JOIN sap_capire_bookshop_Books_texts AS localized_1 ON localized_1.ID = L_0.ID AND localized_1.locale = session_context( '$user.locale' );
CREATE VIEW CatalogService_ListOfBooks AS SELECT ... FROM CatalogService_Books AS Books_0;
CREATE VIEW localized_AdminService_Books AS SELECT ... FROM localized_sap_capire_bookshop_Books AS Books_0;
CREATE VIEW localized_CatalogService_Books AS SELECT ... FROM localized_sap_capire_bookshop_Books AS Books_0 LEFT JOIN localized_sap_capire_bookshop_Authors AS author_1 O ... ;
CREATE VIEW localized_CatalogService_ListOfBooks AS SELECT ... FROM localized_CatalogService_Books AS Books_0;

    Note: If you use SQLite, ALTER TYPE commands are not necessary and so, are not supported, as SQLite is essentially typeless.

Generate Scripts ​

You can use cds deploy with option --script to generate a script as a starting point for a manual migration. The effect of --script essentially is the same as for --dry, but it also allows changes that could lead to data loss and therefore are not supported in the automatic schema migration (see Limitations).

For generating such a script, perform the same steps as in section Dry-Run Offline above, but replace the command in step 3 by

sh
cds deploy --script --delta-from cds-model.csn --out delta_script.sql

If your model change includes changes that could lead to data loss, there will be a warning and a respective comment is added to the dangerous statements in the resulting script. For deleting an element, it would look like this:

sql
...
-- [WARNING] this statement is lossy
ALTER TABLE sap_capire_bookshop_Books DROP price;
...

WARNING

Always check and, if necessary, adapt the generated script before you apply it to your database!

Deployment Using Liquibase ​

You can also use Liquibase to control when, where, and how database changes are deployed. Liquibase lets you define database changes in an SQL file, use cds deploy to quickly generate DDL scripts which can be used by Liquibase.

Add a Maven dependency to Liquibase in srv/pom.xml:

xml
<dependency>
    <groupId>org.liquibase</groupId>
    <artifactId>liquibase-core</artifactId>
    <scope>runtime</scope>
</dependency>

Once liquibase-core is on the classpath, Spring runs database migrations automatically on application startup and before your tests run.

① Initial Schema Version ​

Once you're ready to release an initial version of your database schema, you can create a DDL file that defines the initial database schema. Create a db/changelog subfolder under srv/src/main/resources, place the Liquibase change log file as well as the DDL scripts for the schema versions here. The change log is defined by the db/changelog/db.changelog-master.yml file:

yml
databaseChangeLog:
   - changeSet:
       id: 1
       author: me
       changes:
       - sqlFile:
           dbms: postgresql
           path: db/changelog/v1/model.sql

Use cds deploy to create the v1/model.sql file:

sh
cds deploy --profile pg --dry --out srv/src/main/resources/db/changelog/v1/model.sql

Finally, store the CSN file, which corresponds to this schema version:

sh
cds deploy --model-only --dry --out srv/src/main/resources/db/changelog/v1/model.csn

The CSN file is needed as an input to compute the delta DDL script for the next change set.

If you start your application with mvn spring-boot:run Liquibase initializes the database schema to version v1, unless it has already been initialized.

WARNING

Don't change the model.sql after it has been deployed by Liquibase as the checksum of the file is validated. These files should be checked into your version control system. Follow step ② to make changes.

② Schema Evolution ​

If changes of the CDS model require changes on the database, you can create a new change set that captures the necessary changes.

Use cds deploy to compute the delta DDL script based on the previous model versions (v1/model.csn) and the current model. Write the diff into a v2/delta.sql file:

sh
cds deploy --profile pg --dry --delta-from srv/src/main/resources/db/changelog/v1/model.csn --out \
                                           srv/src/main/resources/db/changelog/v2/model.sql

Next, add a corresponding change set in the changelog/db.changelog-master.yml file:

yml
databaseChangeLog:
   - changeSet:
       id: 1
       author: me
       changes:
       - sqlFile:
           dbms: postgresql
           path: db/changelog/v1/model.sql
   - changeSet:
       id: 2
       author: me
       changes:
       - sqlFile:
           dbms: postgresql
           path: db/changelog/v2/model.sql

Finally, store the CSN file, which corresponds to this schema version:

sh
cds deploy --model-only --dry --out srv/src/main/resources/db/changelog/v2/model.csn

If you now start the application, Liquibase executes all change sets, which haven't yet been deployed to the database.

For further schema versions, repeat step ②.

Only compatible changes

A delta DDL script is only produced for changes without potential data loss. If the changes in the model could lead to data loss, an error is raised.

Migration ​

Thanks to CAP's database-agnostic cds.ql API, we're confident that the new PostgreSQL service comes without breaking changes. Nevertheless, please check the instructions in the SQLite Migration guide, with by and large applies also to the new PostgreSQL service.

cds deploy --model-only ​

Not a breaking change, but definitely required to migrate former cds-pg databases, is to prepare it for schema evolution.

To do so run cds deploy once with the --model-only flag:

sh
cds deploy --model-only

This will...:

  • Create the cds_model table in your database.
  • Fill it with the current model obtained through cds compile '*'.

IMPORTANT:

Your .cds models are expected to reflect the deployed state of your database.

With Deployer App ​

When you have a SaaS application, upgrade all your tenants using the deployer app with CLI option --model-only added to the start script command of your package.json. After having done that, don't forget to remove the --model-only option from the start script, to activate actual schema evolution.

MTX Support ​

WARNING

Multitenancy and extensibility aren't yet supported on PostgreSQL.

DEV PREVIEW
See cap.cloud.sap